Ouellet OTM Bedienungsanleitung PDF herunterladen (Seite 13)

4.1 Planning Work

Materials provided by Ouellet Canada Inc.

- Thermat floor heating system roll

- Installation instructions

- Electrical panel label

- Floor temperature sensor

Material required

- Temperature control with GFCI (available at Ouellet Canada Inc.)

- Cable check tester (available at Ouellet Canada Inc.)

- Stapler

- Protective glasses

- Measuring tape

- Broom

- Mop and bucket

- Felt marker

- Tape

- Hot glue gun

- Wood chisel

- Hammer

- Multimeter and megohmeter

- Electrician tools

- Electrical tape

For installation over a concrete slab, add the following:

- Spray adhesive

- Concrete chisel

Room Layout and Corresponding Thermat Product

- Create a room layout plan to scale (for maximum accuracy, use the Ouellet

Canada Inc form designed for this purpose);

- Identify all stationary elements (toilet, bath, shower, counters, drawers, and

permanent furnishings) and never install the heating cable under these

stationary elements (fig. 4.1);

- Determine thermostat or temperature control location;

- Note room dimensions;

- Determine cold lead location;

- Calculate the heating area in square feet (sq. ft.);

- Select the Thermat product from Table 2.1 to cover 80 % of the surface

or subtract a mimimum of 50 mm (2 in) around walls and stationary elements.

4. Installation Instructions

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Keine Kommentare

Ouellet OTM Bedienungsanleitung Seite 13