Ouellet OTM Bedienungsanleitung PDF herunterladen (Seite 19)

4.5 Installating the Temperature Sensor

Hot glue gun, hammer, wood chisel or concrete chisel

- To minimize floor height, chisel a 10 mm x 10 mm x 250 mm

(3/8” x 3/8” x 10”) channel in the subfloor to receive the temperature sensor.

The sensor must be embedded in cement or an equivalent binder (cement

glue, ceramic glue, self-levelling cement).

- Glue the sensor to the subfloor (fig. 4.5). The sensor must be solidly fastened

to the subfloor to ensure it stays in place when the cement or an equivalent

binder (cement glue, ceramic glue, self-levelling cement) is applied.

channel

temperature

sensor

Fig. 4.5

CAUTION!

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

Ouellet OTM Bedienungsanleitung Seite 19