Ouellet OTM Bedienungsanleitung PDF herunterladen (Seite 14)

We can help optimize your work plan. Fax it to us at 1 800 662-7801.

Clearly indicate all dimensions. A minimum of one horizontal and

one vertical dimensions are necessary to validate the scale.

4.2 Preparing the Subfloor

- Clean and remove any debris, dust, or protruding objects that could damage

the heating cable. The surface must be clean and dry for the adhesive mat to

adhere perfectly to the subfloor;

- Subfloor cracks must be filled with polyester wood filler;

- The subfloor must be solidly fastened in place to prevent movement;

- The application of a floor levelling product is recommended to prevent future

damage to the ceramic caused by subfloor movement;

- For concrete subfloor, apply a surface sealer that is compatible with electrical

heating systems in accordance with the cement glue manufacturer’s

instructions. Completely coat the surface;

- Let dry before installing the Thermat system (refer to the sealer’s instructions for

drying time).

4.3 Marking the Floor

Felt marker

- On the floor of an empty room (under construction or major renovations),

draw the location of stationary elements (toilet, bath, shower, counters, drawers,

permanent furnishings) that will be installed later. These marks will outline the

heating area to ensure the Thermat system is not placed under these stationary

elements (fig. 4.3 a);

- Draw lines on the floor the width of the mat 0.41 m (16”) or 0.82 m (32”);

- Indicate in which direction the Thermat system will be unrolled;

cold lead

temperature

sensor

10'

Fig. 4.1

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Keine Kommentare

Ouellet OTM Bedienungsanleitung Seite 14