Ouellet OTM Bedienungsanleitung PDF herunterladen (Seite 22)

5. Temperature Regulation

4.9 Using the Thermat System

- The Thermat floor heating system is now ready for use. However, before

turning on the system, make sure the curing period specified by the cement or

binder manufacturer has expired. Adjust the thermostat’s temperature based

on your needs and desired level of comfort.

5. IMPORTANT!

The Thermat system must be controlled by a temperature control system.

If Thermat is to be used for floor warming, an electronic floor temperature

control featu ring a floor sensor is recommended to ensure heat levels never

exceed the floor covering’s maximum temperature tolerance.

If the system is to be used for radiant heating, the room thermostat controls heat

and is reac ting to room and not floor temperature therefore a floor covering with

greater temperature resistance must be used.

The room temperature control and floor temperature sensor must never be

installed where they will be exposed to sunlight or air drafts.

The Thermat floor heating system must be connected to a ground fault

circuit interrupter (GFCI) when installed in a bathroom. Ouellet Canada Inc.

strongly recommends the use of a GFCI in all rooms featuring the Thermat

system.

Recommended temperature regulation devices:

1- Thermostat with floor sensor and integrated GFCI (floor warming only).

2- Rheostat dimmer switch with a GFCI.

3- Electronic ambient thermostat with a GFCI (radiant room heating).

CAUTION!

1 2 ... 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

Ouellet OTM Bedienungsanleitung Seite 22